Higher cell survival rate:
Cooling rate consistency is very good, freeze an individual experimental, or a full load. The cooling rate on each sample is the same every time
Low cost:
No maintenance costs, no need to replace anything. Once you purchase the FreezeCell™, it will serve you for years to come.
Reuse the FreezeCell™ over and over, 5-minute turnaround time
The FreezeCell™ foot print is minimal, and won’t use up a lot of freezer space.
Easy to use:
No need to add any liquid or pre-cooling, simply put your samples directly into theFreezeCell™, and prepare them for ULT storage.
Easy to open lid, and you can hold the FreezeCell™ directly from the -80℃ freezer without any concern of Frostbite
to your fingers.
Transfer the samples conveniently. You can remove the whole box or an individual sample at anytime.
Usage
Simply put the samples to be frozen into FreezeCell™, and apply the lid. The FreezeCell™ must be placed
in a -80℃ environment for at least 3 hours, during the cooling period, do not opened during the cooling
process. After the cooling processing is complete, the sample can be removed and transferred to liquid
nitrogen tank for long term storage. If you need to reuse the FreezeCell™ quickly, simply open the lid and
remove the tray, let them both return to room temperature, then you are ready to use again.
Caution: If the FreezeCell has water on its surface (inside or outside the box) and it is placed in -80oC freezer, the water on its surface will freeze the surfaces together.
Opening a box frozen in this way may damage the FreezeCell. Always use the FreezeCell in a dry environment. Wipe any water or liquids from the surface before placing it in the freezer.
Request Quote from Distributor or more information:
info@crystalindustries.com